Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2003
    Posts
    127

    Unanswered: DB2 Fault Monitor respawning too rapidly ...

    Hello,
    I recently upgraded db2 v8.2 fixpak 2 to fixpak5. I turned off the fault
    monitor to make sure it doesn't respawn. After the install, system is stable and there are no performance issues. I noticed one thing though, AIX error report has the following message and nothing in the db2 logs.


    Detail Data
    SOFTWARE ERROR CODE
    Command is respawning too rapidly. Check for possible errors.
    COMMAND
    id: fmc "/usr/opt/db2_08_01/ #DB2 Fault Monitor Coordinator"

    Thanks
    Srini

  2. #2
    Join Date
    Jun 2006
    Posts
    471

    fmc

    there is a known error in this level
    to correct this : modify the record in /etc/initab/...db2fmc
    and change the bin to bin32
    or install at least fp10
    Best Regards, Guy Przytula
    DB2 UDB LUW certified V6/7/8

  3. #3
    Join Date
    Mar 2004
    Posts
    46
    Alternatively, if you do not want to use fmc, then you can comment out the line in /etc/inittab and run "init q". Note that both this things requires "root" privileges, so you will have to work with your sysadmin.

  4. #4
    Join Date
    Jun 2003
    Posts
    127
    Hello, Thank you both for your response. Yes, as soon as I noticed the message, I commented it out. v8.1 fix 12. is the current version of the system. You said this is a bug in fix10. Does it show up in fix12 as well?
    To be clear, I upgraded from 8.1 fix9 to fix12.

    Thanks ...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •