Results 1 to 3 of 3

Thread: DB2 Error

  1. #1
    Join Date
    Oct 2007
    Posts
    5

    Exclamation Unanswered: DB2 Error

    reorg table <Table_Name>

    SQL2216N SQL error "-30081" occurred while reorganizing a database table
    or
    its indexes.
    Can anyone please advise what needs to be done to rectify it.

  2. #2
    Join Date
    Jan 2003
    Posts
    4,292
    Provided Answers: 5
    -->? sql2216


    SQL2216N SQL error "<sqlcode>" occurred while reorganizing a
    database table or its indexes.

    Explanation:

    An error occurred during the reorganization of a database table
    or its indexes.

    The utility stops processing.

    User Response:

    Look at the SQLCODE (message number) in the message for more
    information. Make changes and resubmit the command.

    -->? sql30081


    SQL30081N A communication error has been detected.
    Communication protocol being used: "<protocol>".
    Communication API being used: "<interface>". Location
    where the error was detected: "<location>".
    Communication function detecting the error:
    "<function>". Protocol specific error code(s):
    "<rc1>", "<rc2>", "<rc3>".

    Explanation:

    An error has been detected by the communication subsystem.

    If the connection has already been established, possible causes
    include the following:

    o A communication subsystem error at the client node or server
    node has caused the connection to go down.

    o If a SOCKS server is being used, a communications subsystem
    error on the SOCKS server has caused the connection to go
    down.

    o A network error has caused the connection to go down.

    o The database agent at the server was forced off by the system
    administrator.

    o The database agent at the server was terminated due to an
    abnormal termination of a key database manager process.



    If you are trying to establish a new connection, possible causes
    include the following:

    o The remote database server has not been cataloged correctly
    at the client.

    o The database manager configuration file at the server has not
    been configured with the proper communication parameters.

    o The communication subsystem at the client node or server node
    has not been configured correctly, or has not been started
    successfully.

    o The communication subsystem at the SOCKS server, if one is
    being used, has not been configured correctly, or has not
    been started successfully.

    o The DB2COMM environment variable at the server doesn't
    specify the communication protocol used by the client.

    o The database manager at the server has not been started, or
    has not been started successfully. One or more of the
    communication protocols specified by DB2COMM may not have
    been successfully started.



    Refer to the token values for details. Depending on the
    protocol being used and the communication function invoked, some
    tokens may not be applicable. The following is the explanation
    of the token values:


    <protocol> The actual communication protocol being used. Valid
    token values are:

    o TCP/IP

    o APPC

    o NETBIOS

    o IPX/SPX



    <interface> The application programming interface used to invoke
    the above communication protocol services. Valid token values
    are:

    o SOCKETS

    o SOCKS

    o CPI-C

    o DLR or DD

    o TLI or Connection/Bindery

    o SOAP

    o MQI-CLIENT



    <location> This is a protocol specific ID which uniquely
    identifies the node that detected the error. If the protocol
    being used is:

    o TCP/IP

    The format of the ID is the Internet address in dot
    notation.

    o APPC

    The format of the ID is the fully qualified LU name
    (networkID.LUname).

    o NETBIOS

    The format of the ID is the Workstation name (nname).

    o IPX/SPX

    The format of the ID is the network address and node address
    in hexadecimal notation (network.node).

    o MQ

    The format of the ID is the MQ queue name.

    o SOAP

    The format of the ID is the Internet address in dot
    notation.



    If the location information is not available at the time that
    the error occurred, this token is not filled in.

    <function> The name of the communication subsystem function that
    returned the error code(s).

    <rc1>, <rc2>, <rc3> The list of the available error codes and
    subcodes that are specific to each protocol being used. Tokens
    that are not applicable contain "*".

    If the protocol being used is:

    o TCP/IP



    - If <rc1> is present and contains the global errno value from
    the TCP/IP sockets function call. When using Windows Sockets,
    if present, <rc1> contains the error from the TCP/IP
    sockets function call returned by WSAGetLastError().

    - If <rc2> is present and contains the global h_errno value
    from the TCP/IP name resolution function call. When using
    Windows Sockets, if present, <rc2> contains the error
    from the TCP/IP database function call returned by
    WSAGetLastError().

    - If <rc3> is present and contains "0", it means that the
    TCP/IP connection has been closed. This could be caused by one
    of the following:

    - The database agent at the server was forced off by the system
    administrator.

    - A database agent could not be started at the server because
    the maxagents database manager configuration
    parameter has been exceeded. Check the administration
    notification log to see if an error message has been
    logged.

    - The connection may have been closed by the remote server at
    the TCP/IP level.

    - The database agent at the server was terminated due to an
    abnormal termination of a key database manager
    process.



    Note: When using Windows Sockets, if the <function> is
    WSAStartup, and <rc1> is 0, then <rc2> contains the
    Windows Sockets Specification version level requested by
    DB2, and <rc3> contains the Windows Sockets
    Specification version level supported by the Windows
    Sockets DLL.

    o APPC

    <rc1> contains the return code from the CPI-C function. If
    present, <rc2> contains the global errno value from the
    CPI-C function call. <rc3> is not applicable.

    o NETBIOS

    <rc1> contains the return code from the call to NetBIOS.
    <rc2> and <rc3> are not applicable.

    o IPX/SPX

    <rc1> contains the global t_errno value from the call to
    TLI Services, or the return code from the call to NetWare
    Connection or Bindery Services. If the <rc1> t_errno is
    TLOOK, <rc2> contains the TLI event that has occurred. If
    the <rc2> event is T_DISCONNECT, <rc3> contains the
    disconnect reason code. On AIX, if the <rc1> t_errno is
    TSYSERR, <rc3> contains the system errno (defined in
    sys/errno.h). If <rc1> contains the error return code from a
    call to AIX NetWare Connection or Bindery Services, <rc2>
    contains the error generator.

    o MQ

    <rc1>contains the function completion code, 1 for a warning
    and 2 for an error. <rc2> contains the MQ-specific error
    code. <rc3> is not used for MQ.

    o SOAP

    <rc1> contains the return code from the SOAP communication
    function. The <rc2> depends upon the value of <rc3>.
    <rc2> is either:

    - The TCP/IP sockect error errorno value in UNIX,
    WSAGetLastError for Windows operating systems.

    - A Secure Socke Layer (SSL) return code from the Global
    Security Kit (GSK).

    The <rc3> value "0" indicates that this is a high-level
    SOAP error (not a socket or GSKit error). the <rc3> value
    "1" indicates that this was a socket error. the
    <rc3> value "2" indicates that this was a GSKit
    error.





    See the Communications Errors appendix of the Message Reference
    for more information on specific communication error codes.

    User Response:



    If the connection has already been established, check if:

    1. The database agent at the server has been forced off.

    2. The database manager at the server has abnormally
    terminated.

    3. A communication subsystem or network error has occurred. See
    the Message Reference for more information on specific
    communication error codes.

    If you are trying to establish a new connection, check if:

    1. The remote database server is cataloged properly on the
    client node.

    2. The database manager configuration file at the server is
    configured with the proper communication related parameters.
    If the database manager configuration parameters have been
    updated at the server, ensure that you stop and then re-start
    the database manager, for the changes to take effect.

    3. The communication subsystems on both client and server nodes
    are configured and started up properly.

    4. The DB2COMM environment variable at the server specifies the
    communication protocol used by the client.

    5. The database manager at the server is successfully started.
    Start database manager processing at the server should have
    returned SQL1063, and not SQL5043. If SQL5043 is returned,
    check the administration notification log for more
    information.

    6. A communication subsystem or network error has occurred.

    If the problem persists, consult with your network administrator
    and/or communication expert to determine the cause of the problem
    using the set of tokens provided.

    sqlcode : -30081

    sqlstate : 08001


    -------------------------------------------------
    I would suggest that you run the reorg on the server and not from a remote workstation.

    Andy

  3. #3
    Join Date
    Oct 2007
    Posts
    5
    Thanks Andy,
    I tried it and it worked.
    Thanks alot for your help.

    regards
    Pankaj

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •